Our Sites
Our Sites
ShareThis Page

Three Easy Steps to a Beautiful Wood Finish

Decorating with wood is a popular and economical way for do-it-yourselfers to make their homes more beautiful, welcoming and comfortable.

That's because adding a colourful stain to unfinished furniture, restoring the sheen to old hardwood floors or bringing out the natural beauty of paneling and trim is easier than you might expect. Just follow these three simple steps for a beautiful wood finish:

Step One
Make sure the wood is ready to stain by first sanding it lightly in the direction of the grain with a medium grit sandpaper, followed by a fine grit. Tip: After sanding, if the wood is soft or porous, always use a pre-stain wood conditioner to prevent blotching. If you are using a water-based stain, be sure to use a pre-stain wood conditioner, regardless of wood species.

Step 2: Select and Apply Wood Stain
Choosing a wood stain is a matter of personal preference and do-it-yourselfers have a variety to choose from. Stains such as Minwax® Wood Finish™ feature traditional wood tones, while the company's Water-Based line (which includes six wood tones and 60 custom colors) allows you to select a stain colour to coordinate with your decor. Tip: Before staining, always test the selected stain on a hidden area of your piece, or on scrap wood that matches the wood species of your project.

Step 3: Add a Protective, Clear Finish
After staining, always top coat with a clear finish. It will protect the wood against water, household chemicals, food stains and everyday wear.Tip: To minimize brush marks and bubbles, "tip off" each section of your project before the finish dries. Hold the brush at a 45-degree angle and lightly run the bristles over the entire length of wood.