ShareThis Page

One-Step Stain & Finishes

Minwax® Express Color™ Wiping Stain & Finish

Minwax®  Express Colour Wiping Stain & Finish

Minwax® Express Colour is a wiping stain and finish that makes wood finishing easy! Simple to use, Minwax® Express Colour creates stunning colour and beautiful results in one effortless step. Just wipe on, let it dry and you are finished in an hour. Minwax® Express Colour is water based so it's low odour, fast drying and cleans up with soap and water.




Product Details

Application Tool: soft cloth
Location: interior wood surfaces
Recoat: after 1 hour
Dry time: 1 hour
Cleanup: soap and water
Coverage: 30-35 square feet per tube
Coats: Normally one coat. For deeper colour, additional coats may be applied.
Recommended Uses: furniture, woodwork, cabinets, and accessories

FAQ

Q. What are the advantages of using Minwax® Express Colour?

With Minwax® Express Colour, you can finish a project in one easy step. Just wipe on, let it dry and you are done. Minwax® Express Colour takes about an hour to dry. It is low odour and cleans up with soap and water.

Q. How do I apply Minwax® Express Colour?

Minwax® Express Colour is very easy to use. Wipe on the product to bare wood using a clean, lint free cloth, moving in the direction of the wood grain. Wipe away the excess, in the direction of the wood grain, with a clean cloth. Let it dry for an hour and you are done!

Q. How many colours is Minwax® Express Colour offered in?

Minwax® Express colour is available in 4 wood tone colours and 4 contemporary colours.

Q. If I want extra protection, can I apply a clear topcoat over Minwax® Express Colour?

Yes, for extra protection without adding more colour, wait three hours after applying Minwax® Express Colour, then you can apply Minwax® Polycrylic®, Minwax® Water Based Oil-Modified Polyurethane, or Minwax® Water Based Wipe-On Poly.

Directions

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at (800) 424- LEAD, or log on to www.epa.gov/lead.

SURFACE PREPARATION

  • Sand the wood smooth.
  • Remove all sanding dust.

STAIN APPLICATION

CLEAN UP

  • Soap and warm water

COVERAGE

  • 30-35 square feet per tube

Colours

The colours shown are for reference purposes only. They have been reproduced using digital production techniques. Always test stain on a hidden area of the wood to verify desired colour.

Wood Tone Colours Contemporary Colours
Oak
Oak
Emerald
Emerald
Walnut
Walnut
Crimson
Crimson
Mahogany
Mahogany
Indigo
Indigo
Pecan
Pecan
Onyx
Onyx